Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks
[ 3 Answers ]
I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.
Intertherm furnace manual G5RA060
[ 0 Answers ]
My system was working fine 2 months ago. Just now wanted to turn it on. And now it will not turn on at all. Any help would be great. Thanks it is a intertherm g5ra060
My intertherm furnace pilot lights but furnace won't kick on
[ 5 Answers ]
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
Intertherm Furnace
[ 1 Answers ]
The Hot surface ignitor comes on and lights the burner, but goes off after about 9 seconds. It repeats this and then locks out. What could be causing this. Intertherm Furnace: Model #MMHB-56ABHR-01 View more questions Search
|