Ask Experts Questions for FREE Help !
Ask
    mikespike1733's Avatar
    mikespike1733 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2006, 02:59 PM
    Furnace not working
    I have a payne HVAC and burner will come on, when I went up in the attic to check it out I noticed a part missing, I believe it was the alternate limit switch, would this cause for the unit to not come on, do I need a switch? Thanks in advance to whom ever can answer my question!
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 15, 2006, 03:46 PM
    Yes it will.
    mikespike1733's Avatar
    mikespike1733 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Nov 15, 2006, 04:25 PM
    Quote Originally Posted by NorthernHeat
    Yes it will.
    I don't know if I asked the question correctly, but the furnace will not come on at all, it did fire up the first time but shut down and I have not been able to get it to relight, did you say I do need the alternate limit switch in order for the furnace to fire up? Thanks again for your expertise!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Furnace not working correctly [ 1 Answers ]

My furnace kicks on and off like everything is okay but it blows cold air. I took the cover off and it has an automatic pilot but it is not coming on. Any suggestions?

Furnace not working! Help! [ 4 Answers ]

We have a Montgomery Ward 700 furnace with central air. It worked fine all summer. My husband turned the heat on about two weeks ago and all was well. A couple of days ago it started to act up. It would kick on and the blower would come on and kick off in a few seconds. Every three or four minutes...

Furnace not working [ 1 Answers ]

I have a Intertherm Split System A Frame unit. I turned the furnace on and it came on ran for about 1 min and went off. It did this 3 or 4 times then I turned if off. It was blowing heated air through vents, it just kept shutting off and comeing on every 1 min or so till I turned it off. Now it...

Now furnace not working [ 2 Answers ]

I went back to check my connections, then turned the AC/Furnace on and got nothing .When I went down to the furnace it smeeled like something burned.I can't see any thing but I think I blew it. What do you think ?

View more questions Search