Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier Furnace - Burners turn on and off
[ 2 Answers ]
On my Carrier furnace (model 58G5100-2) the igniter starts the pilot, and most times the pilot starts the burners after a minute or two and then the blower motor starts. Other times, pilot lights the burners which burn for a minute or two, stop and then start again... and after a few minutes...
Furnace fan slow to turn on, off
[ 3 Answers ]
We recently (as in last week) purchased a cabin equipped with a Day and Night forced air furnace. The fan for the furnace seems to take an awful long time to come on after the burner assembly ignites, and, similarly, the fan takes an awful long time to turn off after the furnace is turned off. ...
RTH230B doesn't turn the furnace on
[ 1 Answers ]
I have a Honeywell RTH230B thermastat and it's starting to get a little chilly here. My 84 year old Mother would really appreciate some heat however I can't make the thermastat come on. I thought the pilot light was out so we called the gas company; when he came out he told me to replace the...
Blower for furnace won't turn on
[ 2 Answers ]
I have just re-lit my pilot light for the winter. The furnace is turning on with the thermostat set, but the blower isn't. If I put the blower to manual it turns on, but not in the auto setting. What do I need to do?
Furnace blower won't turn on
[ 8 Answers ]
I have a Bryant 395C furnace. The blower won't come on even when thermostat fan switch is set to "on." I've verified that I'm getting 24V AC between terminals marked G and C on the furnace. Blower has 3 wires going into circuit board on furnace. These are colored red, black, and white; red is... View more questions Search
|