Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Central Air Coil Drain
[ 3 Answers ]
I recently installed a new central air/furnace system in my home. The furnace and A-coil are both Lennox, with a Haier condenser unit outside. The problem I'm having is with the drain tube on the A-coil drain. When I first started the system, it drained quite a bit of condensed water during the...
Air lock in hot water cylinder primary coil
[ 3 Answers ]
See attached photo. My neighbour has a central heating system with a new boiler, pump and mid position valve but an oldish hot water cylinder. When the boiler is pumping water around the radiators only it works fine. But when it is pumping water around the primary coil in the cylinder it never...
Air gap coil setting
[ 5 Answers ]
My lawnmower has a 16Hp Briggs and Stratton engine. I would like to know the correct setting for the coil. I currently have it set at .010. The lawnmower won't restart after it has been running for awhile. After it cools down it starts okay.
New Outside Condsing Unit, Bad indoor Coil - Go with Heat Pump or Buy New Coil?
[ 7 Answers ]
Hi All, Here is my issue. Recently, our home warranty company paid to replace a 25 year old 7 SEER Borg Warner outside unit, but swore up and down that the indoor Borg Warner Coil would be OK with the new 10 SEER Carrier. We no longer have this home warranty company and they are not standing...
Leak in a water coil in the furnace
[ 1 Answers ]
Our furnace which also heats our water was leaking out a tube on the side of the furance. The oil company turned off a valve and told us we had a pin hole leak in our water coil if the pressure got to 30 or above. Does this sound correct to you?? View more questions Search
|