Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace thermostat needs 24 v wire
[ 6 Answers ]
My new White Rogers programmable furnace stat says it needs 24 v dc to run it. I installed it and am using the 2 AA batteries to power it, but I have 4 wires coming in now. I have A/C. The stat is running OK now but if I take the batteries out the display goes dead. I don't know how to run 24 v...
Thermostat Wiring for Electric Furnace
[ 2 Answers ]
I'm want to install the thermostat on our Electric Furnace. The wire leading to the furnace is a two wire (BLACK AND WHITE WIRES) It's heat only. The thermostat has a W and an R on the back of the stat. The furnace terminal has Y,W,O,C,G,F. The WO has a jumper between them? The W has a White...
Thermostat/Furnace Wiring Connection
[ 1 Answers ]
Whew! It's over a 100 degrees in this house. My blower will turn on but the outside compressor will not. I notice that I now have a loose yellow wire inside the Goodman furnace. This yellow wire comes from the Y terminal on the thermostat. It must be related to my problem, but I don't know...
Furnace 911, I have an infant in the house!
[ 4 Answers ]
My furnace is acting up. It's a natural gas unit. We noticed that the temp dropped way below the set mark and after turning the thermostat all the way up the furnace kicked in, then kicks back off. I watch it and it makes several attempts to fire up, I see flames in there, they go for a couple...
Thermostat for wall furnace?
[ 1 Answers ]
I have a ten year old (propane) gravity wall furnace that came with it's own wall mounted thermostat, which is a Honeywell "Millivolt". I am now relocating the thermostat, because of a small remodeling, and want to replace the thermostat with a more up to date (looking) thermostat. Can I just go... View more questions Search
|