Ask Experts Questions for FREE Help !
Ask
    snakeman1014's Avatar
    snakeman1014 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 17, 2007, 06:33 AM
    Bryant gas hot air furnace
    I have a bryant gas hot air furnace model #397HAW036100. It has been nothing but trouble since day 1. here's my problem this year again. Purge fan kicks on gas valve goes on to pilot lights. Clicks on gas valve and pilot goes out. Does this about 6 times before it locks out. Last couple years replaced pilot assb. (LH680005) and it worked fine for the winter months. This year same sitsuatiion. Replace pilot assb. But with no further results. Pilot comes on but goes back out. Could it be a bad pilot assb. From new or something else?
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #2

    Nov 17, 2007, 09:48 AM
    Sounds like you have a bad firing valve

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace blowing cold air (Bryant 310AAV) [ 5 Answers ]

Folks, Could really use some help/advice. I have a Bryant 310AAV gas furnace installed in our home. This is new construction (4 years old) so I assume it's one of the new furnaces that does NOT have a pilot. Here is the problem: The furnace is not blowing any hot air. I've turned the...

No heat. Bryant 383k upflow gas furnace [ 1 Answers ]

12 yr old Bryant 383k upflow gas furnace. When first starting blowers run through three cycles then furnace locks out. Tried reseting Darft Safegaurd tube switch and Manual Reset Limit switch. Replaced filter. Have other gas appliances that work fine.

Bryant Gas Furnace Problem [ 4 Answers ]

Hi, I have a Bryant 373LAV Gas furnace that has stopped working. There are a couple of issues with the furnace and I'll try to explain what is going on. For now, the heat does not turn on. The thermostat (White-Rodgers Comfort Set II) shows 60 and the heat is set at 70. So I opened up...


View more questions Search