Ask Experts Questions for FREE Help !
Ask
    bigNtall's Avatar
    bigNtall Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 15, 2005, 01:54 AM
    Heat Pump or Pellet Stove
    I am considering replacing my gas fireplace which is more for looks than heating. I am considering installing pellet stove insert in place of the gas fireplace or a Heat Pump. Just looking for something that is cost / energy efficient. ANy Recommendations or expirences would be helpful. Forgot to say that I currently have gas forced air. And the furnace is on the small side for the house and is 10 years old. During the winter it will run almost continusly on the cooler day it has a hard time reaching tempeture.
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
     
    #2

    Sep 15, 2005, 05:20 AM
    In your decision making you should separate a "whole house system" (furnace, heat pump) from a "supplimental" system (pellet stove, fireplace, vent free, etc.).

    Heat pumps are efficient for heating when the outside temperature is above 25-30 degrees. Below that, you are not gaining efficiency.

    As for supplimental heat, there are many factors to consider, so ask a lot of questions at your local dealer - and describe your current system and house layout well.

    Just last year I upgraded my traditional fireplace to a gas vent free insert (98.xx efficient, I think).

    I just love it... so it might be an additional think you may want to consider.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #3

    Sep 15, 2005, 05:45 AM
    I am not sure the heat pump would be a good choice as a supplement in the coldest weather, of course, depending on how cold is cold.

    You don't say how old the house is. If it is an older house, upgrading the insulation and meticulously sealing it up might give a much better pay back. Good windows could make a big difference. Cut air infiltration, and your house will be both warmer and less dry, making it more comfortable.

    It is possible the furnace was undersized because somebody didn't allow for excessive heat loss.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump transformer [ 3 Answers ]

Where is the transformer and what does it look like and how can I tell if it is bad?

Heat Pump? [ 2 Answers ]

I recently had someone install a brand new 98% eff. Furnace with a 13 seer a/c. They offered to put a dual fuel heat pump in for $2000.00. My gas bills are still a little higher than I would like and I wanted to know if a dual fuel heat pump is really worth the extra money and if it would save me...

Pellet Stove [ 2 Answers ]

We recently moved into a home with a pellet stove for heating. Now that the cold weather is upon us, we have no idea how to start it up and no manual can be found. The manufacturer is Forge Stove Company Inc which can not be found on the internet. Any suggestions as to how to get this running or...

Heat Pump [ 7 Answers ]

I have a Lennox heat pump. My builder was required to put one in per our neighborhood association. However, he set the thermostat so that it would never kick on because he thought I would like the hotter air provided by the gas furnace. I was thinking with the price of gas on the rise the heat...


View more questions Search