Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fan blade on my unit won't turn
[ 8 Answers ]
My fan blade on my central unit won't turn. It appears it is trying to turn, so I helped it with a screw driver. The fan blade then runs with out fail, but will not cool. I was told that it might be my capacitor? Why is it when the blade turns it won't blow cold air?
Installing thermastat
[ 2 Answers ]
Hi. I'm trying to install a programmable thermastat and the directions say to mark the wires before taking them off the old one. They are not marked at all anywhere. I have a red and a white one. Any idea what I should mark them as? Any help would be so appreciated. The electrition I called wants...
Flywheel won't turn
[ 27 Answers ]
Ok, Yardman is several years old (I believe about about ten years or so) but I have had it a few months. Worked fine for awhile. Last few times I would cut it would cut for a good while then it would just cut off. Battery is weak so I would always have to jump it off beforehand. No problem with...
Air handling unit won't turn off.
[ 13 Answers ]
Hi, I have moved into new offices and had new server rooms kitted out and went for geothermal cooling, it uses a massive air handling unit to supply the cool air to the server cases but the air handling unit won't stop, I even hit the emergancy stop button on the main control unit. But it Won't...
89 honda civic won't turn over
[ 1 Answers ]
Most of the time it starts.Is now acting up once in a while.when you push clutch to the floor you hear a click and that is all.when you keep pushing pedal to floor it will turn over eventually.Can someone please suggest what's the problem or how to fix this? THANK YOU! View more questions Search
|