Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane xe80 internal control board failure, red light on steady
[ 1 Answers ]
Trane xe80 internal control board failure, red light on steady
Trane xe80 internal control board failure, red light on steady
[ 0 Answers ]
My furnace runs for a while then the flame goes out but the blower keeps running. Control board has solid red light that means internal control board failure (replace)I turn off the power to the unit and then turn back on, it runs for a while then repeats. Seems to get worse the colder it is outside
Trane Xe80
[ 0 Answers ]
Our Trane Xe80 gas furnace had 3 flashing lights sucked on pressure switch unit come on. Now have 9 flashing lights indicating ignitor problem. Should both be replaced? I noticed several people paid to have them replaced and unit still did not work. Any suggestions? Thank You
Trane XE80
[ 0 Answers ]
Trane XE80 No code flash means no power/control failure,what should I check first? Jumper wired at stat and control did not blow fuse. Ac works normally but when call to heat is sent fuse blows on control board.
Trane XE80 Control Board / Booster Fan Questions
[ 4 Answers ]
The blower on my parents Trane XE80 gas furnace stopped working this weekend and a local HVAC company diagnosed the problem as a bad control board. The technician didn't have a board on his truck so he temporarily bypassed the control board and wired the fan to stay on 100% of the time until he... View more questions Search
|