Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Black wire red wire and white wire spliced to 10/3 on a 220 circuit
[ 25 Answers ]
I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...
Outlet Question: Open Neutral - Hot / Grnd Reverse?
[ 6 Answers ]
This past weekend two outlets and one light fixture went dead in my basement after turning on my stereo. I checked the breakers and none had tripped, so I re-set the one in question just to be sure. Still dead. I haven't been in this house too long, so I thought to check for another breaker...
Red wire from ceiling fixture. Does it get connected to black?
[ 1 Answers ]
Good evening, I do realize it is late on a weekend. I just removed an old florcesent light from my kitchen. I was expecting the usual, one black bire, one white, and one ground. A simple connection. Black to black, white to white, and ground to ground screw on new fixture. However, I have two...
Hot to grnd shows 120v
[ 4 Answers ]
The 120v light on the tested comes up when it touch hot and the ground(bare). Is this normal? More info: The 120v light comes on when I touch the neutral(white) and the hot(black). I think this is OK. The light doesn't come up when I touch the neutral(white) and the ground(bare). I think...
I have black red White wire in the ceiling
[ 1 Answers ]
I have black red and white wires in the ceiling and blue black white and green on the fan which do I hook up to which? View more questions Search
|