Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
HELP house furnace thermostat?
[ 4 Answers ]
My furnace will come on with heat SOMETIMES and sometimes it WILL NOT? If I turn thermostat Down and then Up... it come on. Works for a few hours and then may or may not come back on? This is Thermostate problem or Furnace problem? Anything I can check? Thanks,
Furnace thermostat needs 24 v wire
[ 6 Answers ]
My new White Rogers programmable furnace stat says it needs 24 v dc to run it. I installed it and am using the 2 AA batteries to power it, but I have 4 wires coming in now. I have A/C. The stat is running OK now but if I take the batteries out the display goes dead. I don't know how to run 24 v...
Thermostat Wiring for Electric Furnace
[ 2 Answers ]
I'm want to install the thermostat on our Electric Furnace. The wire leading to the furnace is a two wire (BLACK AND WHITE WIRES) It's heat only. The thermostat has a W and an R on the back of the stat. The furnace terminal has Y,W,O,C,G,F. The WO has a jumper between them? The W has a White...
Thermostat/Furnace Wiring Connection
[ 1 Answers ]
Whew! It's over a 100 degrees in this house. My blower will turn on but the outside compressor will not. I notice that I now have a loose yellow wire inside the Goodman furnace. This yellow wire comes from the Y terminal on the thermostat. It must be related to my problem, but I don't know...
Thermostat for wall furnace?
[ 1 Answers ]
I have a ten year old (propane) gravity wall furnace that came with it's own wall mounted thermostat, which is a Honeywell "Millivolt". I am now relocating the thermostat, because of a small remodeling, and want to replace the thermostat with a more up to date (looking) thermostat. Can I just go... View more questions Search
|