Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No gas at the pilot when I hold the knob in to light the pilot.. supply has gas to con
[ 1 Answers ]
Gas valve 36c03(U)-333 an433 Can't get the pilot light to lite (no gas) at pilot tip.. I have 10 houses with these valves.. Gas supply is there to valve.. press the pilot in to light and no gas is present at the tip Can I take the plate off at the pilot knob and lube anything in that...
State select water heater pilot light how to relite the pilot
[ 3 Answers ]
I have a State Select Water Heater, I am assuming the pilot light has gone out as I have not hot water. What process do I do to see if this is indeed the problem before calling in a service man.
Gas wall heater pilot light goes out when I turn the valve from 'pilot' to 'on'.
[ 1 Answers ]
Why does my gas wall heater pilot light go out when I turn the valve from 'pilot' to 'on'? The pilot lights and stays lit until I try to turn the valve. It's got a brand new thermocouple.
Does putting gas hot water heater dial on PILOT put pilot light out?
[ 5 Answers ]
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
Pilot light stays on but pilot switch keeps resetting
[ 5 Answers ]
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually... View more questions Search
|