Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO Heat in One Zone of Multiple Zone System
[ 6 Answers ]
The heat in our four zone house is working except for one zone. Digital Honeywell THermostat lights up when programmed, little flame picture appears and click noise is heard, just like other thermostats, but no heat in that zone. Any ideas what is wrong or how to fix. Thanks
Why is control valve installed in return side rather than supply side?
[ 1 Answers ]
Why we prefer installing the control valve in the return side rather than installing it in the supply side in A/C units
Are zone valves or zone thermostats possible with a steam boiler?
[ 1 Answers ]
I have an old 4 story building with one thermostat controlling the steam heat to all floors. There is a commercial space on the ground floor and they are complaining that they don't get enough heat sometimes (and on occasion get too much!) They have suggested that there is some way to place a...
2 zone oil heat, 2nd zone runs 1st zone
[ 1 Answers ]
Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low... View more questions Search
|