Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace ignites then shuts down
[ 3 Answers ]
When my Goodman furnace (CWP#00299785) turns on, the blower works and the burners ignite, but after a few seconds the burners extinguish. Then the burners ignite again for a few seconds and extinguish once again. Please tell me what part(s) I need and where those parts are located on the furnace....
Gas furnace ignites intermittently-ignites after removing cover from ignitor chamber
[ 3 Answers ]
Unit: Carrier WeatherMaker 9200 gas furnace, with an HSI ignitor Symptom 1: Thermostat is calling for heat, as evidenced by a flame icon on thermostat face, but no action in the furnace. Symptom 2: Ignites only AFTER I initiate Action 2 below. Then it seems to work for a while, until the...
Furnace blower will not start up
[ 3 Answers ]
I replaced my filters and after everything was put back together there is no response from the blower, the furnace will heat up but the blower does not respond. The filter cover has been replaced and the cut-off switch is be pressed. Thanks
Furnace not heating the house. Damper on the furnace not opening. Motor then shuts.
[ 4 Answers ]
My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:
Heil furnace fires up but blower motor shuts down
[ 2 Answers ]
I have a Heil high efficiency furnace about 15 years old. Sometimes the burner will start and the exhaust blower then the blower fan will blow for a short time and stop. The burner will still be very hot. It used to continue to run until the furnace cooled down. What could be wrong? View more questions Search
|