Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What can happen if the sequencer fails on my electric furnace?
[ 7 Answers ]
My electric furnace sometimes wants to keep heating without ever shutting off. Changed the thermostat but, it still happens. I can tap briskly on the sequencer and it will shut off, and it will run as it is supposed to. But, then it can happen again. Is this probably a problem with the sequencer?
How does my sequencer go bad on ny electric furnace
[ 1 Answers ]
After making sure my t stat was not the problem I replaced my sequencer... the problem was that my furnace would not quit making heat... worked for a few weeks and then the same thing happened but now I think one of the thermal fuses blew... what makes the sequencer go bad?
Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks
[ 3 Answers ]
I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.
My intertherm furnace pilot lights but furnace won't kick on
[ 5 Answers ]
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
Intertherm Furnace sequencer
[ 1 Answers ]
How do you replace the sequencer on an Intertherm Furnace by Central Electric? The model # is FEH-012HA-03 Appliance # E0000088245, 240v 60hz 1ph, 51.3 amps. View more questions Search
|