Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Zone valve problem
[ 5 Answers ]
Zone valve for upstairs will not open. Already replaced thermostat. The only time I have heat upstairs is when the valve in manually opened and the downstairs heat kicks on. Any help or advice would be great! Thank you.
Furnace only firing in one zone
[ 1 Answers ]
Hello: I have a digital thermostat and gas heat (forced hot air). When I turn the heat on upstairs, the blower only blows cool air. When I turn it on downstairs, it works normally. I checked the fuse box to see if a fuse had been tripped, but it was normal. What other simple steps can I take...
NG Furnace will not turn on
[ 2 Answers ]
Make: RHEEM Model: RGDO 06NC ER Installed: 1990 Problem: Observe glow in burner area from ignitor but the gas won't turn on. After a few seconds the glow will turn off. The Hot Surface Ignition Module was replaced in 1997. Please advise.
Furnace won't turn off
[ 2 Answers ]
Our furnace won't turn off. I turned the heat off at the thermostat and no luck. I changed out the thermostat with a new one and it is doing the same thing. If the breaker is off, the fan and heat are off; is the breaker is on, the fan and heat are on even if the thermostat is set to off. We... View more questions Search
|