Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Miller Oil Furnace
[ 3 Answers ]
I have a miller oil furnace that was installed in July of 2006 it has been running just fine until now I have power to it but it won't run. I can get the fan to start but when I hit the reset button all I get is the blinking light. Can you help:(
Furnace oil fired
[ 7 Answers ]
I have a beckett oil fired furnace, that has an intermittent problem . If I turn it on most of the time it will come on an work perfect however if I set the thermostat to say 70 the furnace will recycle on and of as it should and then it may pop the reset if I reset it now it may start up and work...
Miller trailer furnace problem
[ 4 Answers ]
:confused: I have a Miller oil furnace in my garage that burns very dark orange and sooty. It also keeps burning inside after the unit shuts down. I have replaced the nozzle twice with no change. The flue from the top of the unit all the way through the roof is clear. Any ideas??
Lennox oil furnace
[ 3 Answers ]
What is the proper procedure for cleaning a oil furnace, such as cleanouts to heat exchangers and where could I find a exploded view of a lennox oil funace
Oil Burner Furnace
[ 1 Answers ]
The problem goes like this. Thermostat calls for heat, burner starts and runs for a minute or so and shuts off. After burner shuts off, the blower starts and the burner starts again until the thermostat reaches temp and the burner shuts off blower contiues to run until the low temp limit is... View more questions Search
|