Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Heat pump thermostat Aux. Light is going on when no resistance heat used.
[ 2 Answers ]
I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...
Settings on heat pump while away
[ 1 Answers ]
We have just purchased a second home on the coast, and in the winter plan to be there about 3-4 days out of each 2-3 weeks. We do have family living nearby who can turn system (heat pump) off/on and adjust the thermostat for very cold weather, but have been advised by a few to keep temperature...
Heat Pump Thermostat
[ 1 Answers ]
I have a Heat Pump by Unitary Products, Model F2FP036N06B with a White-Rodgers thermostat, Type No. 1F89-11. The 5 amp fuse controlling the thermostat has blown three times in the last 24 hours. After replacing the fuse, everything seems to work normally for a few hours before it blows another...
Thermostat settings and heat
[ 3 Answers ]
It seems like my heat pump blows nothing but cool air out of the vents. It is below 10 degrees out right now. I have an them. Het setting on the thermostat but when I switch to that setting the air from the vents feels cool or just not very warm. It also seems as if my furnace never shuts off. ... View more questions Search
|