Ask Experts Questions for FREE Help !
Ask
    ahender's Avatar
    ahender Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 4, 2007, 06:03 PM
    Self ignitor furnace won't fire
    Our Coleman Evcon furnace is reluctant to fire the first time in fall. The ignitor glows but then the gas will not fire. Is something dirty, is this something I can service myself? Appreciate any help, thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 6, 2007, 05:29 PM
    Is the combustion air blower working?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace blower won't come on UPDATED [ 3 Answers ]

Ok It is a Heil gas furnace. No belts. The motor I hear running is apparently the electronic ignition that comes on when I turn the electric on to the furnace. The burner fires, heats and goes out once heated up, no blower comes on. I was told to clean the heat sensor since it may be corroded....

Furnace catching fire [ 1 Answers ]

Our heating furnace is powered by propane gas. There is a weird smell coming from it and when I relit the pilot light & turned the thermostat to "on" fire started blowing out of the furnace. Please help... could we have carbon monoxide in our home? There is also soot caked on the inside of...

Carrier furnace does not always fire [ 1 Answers ]

Have a carrier weathermaker 90% HIGH EFFICINCY FURNACE ,this a spuratic problem.Sometimes when the stat calls for heat I can here the vent van come on and sometimes will run for 15-20 minutes, then the furnace fires up.some times it won't fire at all, shuting off the power switch on the side of the...

Furnace ignitor needs to be replaced and an additional valve? [ 1 Answers ]

Our furnace started blowing out only cold air and the fan seems to run even if the thermostat is off, we tried replacing the thermostat and that was not the problem. It is a tech-4 gas furnace True blue 90. We were told it was the ignitor and that our model would also need to have an additional...

Furnace will not fire [ 1 Answers ]

I have a comfortmaker GNJ075n12a1 80% furnace installed in 96 the igniter come on and the blower comes on and the system cycles a couple of times before the control locksout on during this time the gas valve is not energizing to fire the furnace if you shut the system down for a couple of...


View more questions Search