Search:
Type: Posts; User: rlbell51
Search:
Search took 0.00 seconds.
-
I am finishing my basement bath. As to the venting of the plumbing. From left to right, sink drain, toilet, tub. All drain to a lift pump. A vent is installed there. At the tub drain connection there...
-
The 2" drain pipe in the dap out does not come up the center so I can't get the tub drain into the dap out. Can I ell to it or 45
-
Do I cut away all of the cover all away around? Sounds like the thing to do
-
In my roughed in basement bath, there is a 12"x12" black plastic cover in the floor. Does that cover the shower/bath drain pipe? If so to gain access I guess I just cut the plastic away
-
I am looking for some ideas on where to start framing walls in my basement.I have started one wall along a floor beam. Then laying out the wall along the exterior wall I found that something isn't...
-
I am installing a beacon morris bru 45 heater. Looking for some advise on running the flue. Through the wall or the roof. And how to finish off if I go through the wall. Its vinyl siding
-
Yes.. I was unclear to me also. Thanks so much for your help. If you come up with any other ideas let me know.
Bob
-
So my hot (black) incoming goes to L1 and my netural ( white incoming goes to L2
-
I am sorry.. the unit I have is a beacon morris bru 45. Looking at the wiring diagram it looks like L1 is the hot leg and L2 is the neutral. Just want to be sure.
-
I also have a question on installing this unit. On connecting the electrical. The L1 is the hot wire and the L2 is the neutral?
|