Ask Experts Questions for FREE Help !
Ask
    TWLane's Avatar
    TWLane Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2009, 03:46 PM
    Running a wood furnace blower through a thermostat inside the house?
    For US wood furnace/Model: 1557M [HotBlast]
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 22, 2009, 08:07 PM
    More details and a wiring diagram.
    TWLane's Avatar
    TWLane Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 23, 2009, 06:58 AM

    I have a wood furnace with a thermostat on the back of it.
    I want to do away with that one and run it off a thermostat from inside the house.

    How do I go about this?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Sep 23, 2009, 07:57 AM
    I have a wood furnace with a thermostat on the back of it.
    That is great BUT I have no idea how it is wired or what voltages it works with that is why I requested a wiring diagram so our discussion is accurate.

    I want to do away with that one and run it off a thermostat from inside the house.
    I can understand what you would like to do BUT I have no idea exactly what you have now as far as wiring is concerned. Here again I need a base line to be able to help you. Wiring diagrams are necessary or I will not know the exact safe direction to advise you to go with your control system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wood burning stove blower thermostat [ 1 Answers ]

I bought a new blower fan for my buck wood burning stove insert and the thermostat that used to have 3 speeds high, med & low now only works on high. I figure I hooked the wires up wrong when I got the new blower fan. Any suggestions on the wiring? Eric

Ashley wood furnace blower problem [ 3 Answers ]

I purchased a home with an Ashley wood furnace installed in the basement in tandem with the central heating system . I was told the original owners build the house in the early 80’s and used the furnace regularly. The second owners never used it. I cleaned the furnace and flue and tested the...

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Second thermostat for outdoor wood furnace [ 2 Answers ]

I need help. I have a gas Amana furnace that I have hooked to one thermostat (4 wires) and then a second thermostat (2 wires) hooked for only the fan to come on with use of my outdoor wood furnace. When the 2 wire thermostat call for the fan to come on, the outside compressor will come on. It...

Why is my blower to my englander wood furnace keep kicking on every 20 seconds ? [ 1 Answers ]

I have an Englander add on furnace model 28-3500 which is supposed to heat 3000 sq ft. it is hooked to the ductwork and does have a thermostat.. but it seems the blower kicks on constantly ever 15 seconds.. even when the house is warm.. (but my foyer is always cold). I just don't want this part to...

View more questions Search