Check out some similar questions!
Replacing a mercury thermostat for a Hunter Model 44110 [ 3 Answers ]
I have just purchased a Hunter Programmable Thermostat Model 44110. I have taken out the front panel off my old thermostat and notices that my wires are red, white, yellow and green. The panel for the Hunter 44110 has the connections for G, why, W and the RC and RH have a jumper. What do I do...
Luxpro thermostat to hunter 44260 [ 4 Answers ]
Ok I have looked everywhere and crossed reference as many charts as I can but I still can not seem to find a definite wiring diagram for this. My old Luxpro wiring goes like this and it makes sense. RED WIRE connected to R GREEN WIRE connected to G ORANGE WIRE connected to O WHITE WIRE...
Replacing a Nordyne Thermostat for a Hunter 44260 Wiring! [ 4 Answers ]
I'm having issues, I want to replace my old thermostat for this digital one however, I'm not sure on the wiring. On the Nordyn I had, Y G R O
Replacing old heat pump thermostat with Honeywell RTH3100C [ 1 Answers ]
I have a Rheem heat pump with auxillary and emergency heat. My current thermostat is a Seco TA-2000 with the following wiring configuration: B W2 X are G and a piece of wire connected between E and W2. There's also an orange wire that's not connected to the thermostat. The Honeywell manual does not...
Wiring question replacing Honeywell thermostat w/Hunter [ 0 Answers ]
I am replacing an old standard Honeywell thermostat (model T8034C) with a Hunter programmable digital model 44110. I have a 5-wire system. The wires are color coded and the Honeywell labels match the wire colors. Those are: White, Yellow, Green, Orange, and Red. THe only labels on the...
View more Heating & Air Conditioning questions Search