Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Emerson motor condenser wiring replacing 3 wire motor with 5 wire.
[ 5 Answers ]
Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.
Can I replace a 3p motor with a single phase motor.
[ 1 Answers ]
I have a holly- matic 3 phase 7.5 horse meat grinder- mixer. I do not have 3 phase, can I change the motor to a 7.5 horse single phase 220 motor? Thanks. Tom
Replacement emerson motor wiring different
[ 2 Answers ]
I purchased a replacement fan motor for my Lennox AC unit . The old motor had 3 wires -orange , purple and black. The new one, a emerson K55HXSSm-7146 has 4 wires and a ground-black,white,brown and brown w/white. I hooked the brown wire to the dual capacitor "Fan" terminal. The Black to what...
Air Cond condenser Fan Motor Wiring
[ 2 Answers ]
Does anyone know? I have two black wires on my outside condenser fan that are no different that hooks in to a black wire and a white wire coming out of my new fan motor. Can they be swiched? If not I don't know how to tell which wire to hook the black and white up to. Also it has a brown and a...
Emerson Motor Wiring
[ 2 Answers ]
I've read (most) of the similar questions about blower motor wiring, but haven't seen any that match my configuration. I have an Emerson 1/3hp, 3spd motor with the following wires: Red, blue, black, green (ground) direct from motor. White and brown go from motor to capacitor with black out of... View more questions Search
|