Ask Experts Questions for FREE Help !
Ask
    markuswitte's Avatar
    markuswitte Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2006, 05:44 PM
    Programmable thermostat
    I have a programmable thermostat , but the digital readout says 24.5 degrees all the time. The readout does not change when the temp in the house does. Any suggestions?

    Markus
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Oct 14, 2006, 08:06 PM
    What brand of thermostat? Do you still have the manuals? Many stats have a reset botton under the cover. Or you can remove power from the stat' (batteries and/or A/C from furnace) for 10 minutes to reset it.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Oct 14, 2006, 09:18 PM
    Click the hold button on the thermostat and see if you can move the desired temp up or down by pressing the up and down arrows
    markuswitte's Avatar
    markuswitte Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Oct 16, 2006, 06:33 PM
    Thank you, I tried reseting it but that didn't work, so I returned it because it was defective. Thanks ( it was a noma 5 - 2)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell Programmable Thermostat [ 2 Answers ]

Should My Thermostats Panel Operate On The 2 Aa Backup Batteries Or Be Hardwired To Common And Have Batteries As Backup When Power Is Out? Panel Lights Up With Batteries In, Does Not Without Batteries. Don't Know Where Common Wire Originates From. Can I Splice Into One Of The Other Wires, G, Y,...

Programmable thermostat went blank [ 12 Answers ]

Our thermostat (which has been serving solely as a thermometer since the last time we used the heat in the spring) blanked out yesterday afternoon. I checked the inside temp. during the day, then last evening the face was completely blank. It is completely unresponsive to any button pushing. I...

Noma Programmable thermostat [ 14 Answers ]

I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The AC works fine but when I turn on the heat, the AC come on then too and not the heat. I have no heat. This was the wiring for the original thermostat: Orange -> Y Red ->...

Programmable noma thermostat [ 1 Answers ]

I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I...

View more questions Search