Ask Experts Questions for FREE Help !
Ask
    obspeech's Avatar
    obspeech Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2009, 08:13 AM
    Pilot light on gas logs won't stay lit.
    The pilot will light and stay on as long as the knob is in the pilot position as soon as I turn it to the on position I here a click and it goes out immediately. The flame is the appropriate blue color- not yellow to indicate it needs to be cleaned out. It is touching the thermocouple appropriately as well. We have plenty of gas in the tank and it was working fine for the last 2 months until the pilot just went out spontaneously last week.

    Thanks
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 25, 2009, 09:06 AM
    Thermocouple
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pilot light will not stay lit [ 2 Answers ]

Our pilot light will not stay lit. we changed the thermal cupple, cleaned and adjusted the light. Nothing seems to work

Fireplace logs pilot won't stay lit [ 3 Answers ]

The pilot on my fireplace logs lights with no problem, but won't stay lit. I have held the dial in for as long as 10 minutes but, as soon as I release it, the pilot goes out. Help would be appreciated

Pilot light will not stay on [ 11 Answers ]

I have a very old Commonwealth Co. 16,800 BTU wall heater. I can light the pilot while holding the red knob (pilot light position), but the pilot will go out as soon as I release it (after holding it over the required time) and try to move it to the on position. Does this have something to do with...

Pilot light will not stay on [ 3 Answers ]

I have base board heating and the piolot lite will not stay on. The gas comes out so I can lite the piolot, and I hold down the button for 1 to 2 minutes but it will not stay on. Can anyone help?

View more questions Search