Ask Experts Questions for FREE Help !
Ask
    DWHELP's Avatar
    DWHELP Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 27, 2007, 04:38 PM
    Payne Gas Furnace
    I have a Payne Gas Furnace that works great until it is time for the blower to click on instead of coming on it clicks on and off once and a while it starts but only goes for a minute or two then goes back to clicking on and off can someone give me an idea of what this could be? Could my board be going out??

    Thanks
    Dan
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #2

    Feb 27, 2007, 05:36 PM
    My guess would be the board if you can hear that relay clicking in and out.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace [ 2 Answers ]

For the past 2 nights my furnace has been blowing out cold air. I have a furnace which is equipped with an ignition device which automatically lights the piolet. I did everything from cutting off the gas valve and power to furnace. When I restarted everything back up, the furnace came on but no air...

Gas furnace [ 3 Answers ]

Gas furnace made roger white 505a-241 contaroller flash 3 times error code that means pressure switch stuck open. I don't know and where is the pressur switch. Please help. Thanks

Payne PG9M furnace makes noise rumble shakes can't find the source of it. [ 3 Answers ]

Well I have looked and looked but can't seem to put my finger on it. It's obviously a noise, best description I can give is I was in the basement and I thought a helecopter or train was going by the house. Nope, it was the furnace. So it's a low rumble vibration from the furnace. Here's the...

My gas furnace won't come on by itself. [ 3 Answers ]

I have a goodman furnace.. I replaced the thermostat.. that was'nt the problem.. my heat won't come on by itself.. my husband has to go in the basement and unplug the air pressure switch.. it will then run for about 1/2 day.. then, he has to do it again.. we think it is the air pressure switch, but...

Gas furnace [ 14 Answers ]

Igot a 1972 carrer furnace it catches fire at the spud part of burner I got 11.5 inch watter column preasure on line you can cut it off turn it back on and it burns good blaze looks good I need some comet on air ajustment or what might be causing this I have cleaned the burners , thanks.


View more questions Search