Ask Experts Questions for FREE Help !
Ask
    jeepwagoneer's Avatar
    jeepwagoneer Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2009, 09:02 PM
    Older Coleman Presidential II Electric Furnace problems
    I have a Coleman Presidential II 2702B Ida 7441-BM Electric Furnace.

    I have two problems. It started with the heater coming on and at times staying on even after I turned the thermostat completely down which results in killing the power.

    Now I have a newer problem where a heating element will continuously kick on and off without the blower being on (even with the thermostat turned all the way down)

    Help! ITs cold in here with no heat in winter
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 9, 2009, 10:39 PM
    You have a defective heat sequencer control.
    Eunice wells's Avatar
    Eunice wells Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 14, 2013, 02:10 PM
    Where is the heat sensor
    Eunice wells's Avatar
    Eunice wells Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jun 14, 2013, 02:14 PM
    Quote Originally Posted by Eunice wells View Post
    where is the heat sensor
    Where i.e. the heat sequencer our furnace is a 03950631J
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman presidential II furnace [ 7 Answers ]

Coleman presidential II natural gas furnace. When burner lights the blower doesn't stay running, It cycles on and off every 2 or 3 seconds.

Coleman Presidential 2, electric seems to overheat [ 3 Answers ]

Hello all, I just moved into a mobile home with a Coleman Presidential 2 electric furnace. The elements are getting red hot and the fan isn't coming on. What I noticed is the elements reach a brightness of red becoming very hot and then cool down. After a few seconds they get hot again without...

Coleman Presidential electric furnace [ 2 Answers ]

The blower fan on my electric furnace will not shut off without tripping the main breaker switch. It is an older furnace that had not been used all too often as I generally use a wood/coal stove for heating, but had been operating properly when I have used it. The last time it was used , the...

Coleman Presidential III Model # 7970A856 Furnace [ 6 Answers ]

Coleman Presidential III Model # 7970A856 Furnace The furnace runs for 1-2 minutes, then shuts off for about 30 seconds to a minute, then comes back on. It does that until it gets to the temp I set the thermostat to. I called the local technician, he said it was the fan Switch. He said check the...

Coleman electric presidential furnce [ 1 Answers ]

Hi I have a coleman electric presidential II furnace serial #117960300 model# 3123B750blower #3123A590 when I turn the heat on it will heat and work fine but then the blower stops and the heat keeps heating it gets very hot and I have to trip the breaker to turn it off can any one help me thank you...

View more questions Search