 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
NORDYNE G4 624631-B Relaced, continuous led, now we have heat
NORDYNE G4 624631-B Relaced but give continuous light. We had 5 lights but after reversing the jumpers it fixed that. Demand was set on thermostat when replaced board but didn'tknow therm was shut off and the house was locked up. Like a dummy I hit the wrong jumper. He finally came home, put on demand, took right off. So the board took care of the problem and I apreciate all the info on this subject. All that knowhow was there to tap into. Thanks for this! I wished you all a Merry Christmas, now it's a Happy New Year we have heat after one of the coldest winters in Va. In years. Elwin
|
||||
Check out some similar questions!
10 year old Rheem air handler RHBA-21J8MFCA, 1/3HP, 2.8A. New WeSt Columbia, SC 29170, Model 2HP13L48P-1B, HCFC-22, 4TON. Installed new out of box iN July and AC working splendidly but start-up is "violent" and loud. Installer says I need some sort of "start-up kit". I put off as had planned...
Can someone give me the codes for all the Nordyne LED blinks? My furnace was blining 4 times, I replaced the igniter and now it is blinking 2 times... All the codes would be greatly appreciated - thanks, in advance. :cool:
NORDYNE G4 624631-B Relaced but give continuous light. Board relaced for friend because summerged in water back 2 mo. And must not have been dry enough cause when I powered it up last weekend it started smoking near the power in transformer out area. We now have a duplicate board, got 5 led's,...
M1M Series will not kick on... Red LED has two flashes indicating Pressure switch is open, how do I fix the problem?
I have a Goodman GPM075-4, the blower stays on all the time. The status led flashes 5 times, TS guide inside panel says "false flame detected", "stuck gas valve". Is there a way to bypass or verify this state?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
