Ask Experts Questions for FREE Help !
Ask
    derrough's Avatar
    derrough Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2007, 10:38 AM
    New blower motor has no white wire
    I installed a new blower motor and the new blower did not have a white wire. Now the blower want work at all. How can I get this to work?
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #2

    Aug 7, 2007, 12:48 PM
    What is the voltage and what color wires do you have and is there a capacitor? there should be a wiring diagram on the motor.
    derrough's Avatar
    derrough Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 8, 2007, 01:51 PM
    The voltage is 110. Colors are blue, red, yellow, green, black and white and the capacitor are both tan.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #4

    Aug 8, 2007, 04:07 PM
    The black wire is high speed, the blue is med. High ,the yellow is med. Low speed, the red is low speed , the white is "common" and the two brown wires will go to the capacitor with no other wires on the capacitor. Green to ground.
    You will only use the red wire (low speed) and the black wire (high speed) the white wire will go to the common in the furnace and the two brown wires to the capacitor. The yellow and blue wires will get a wire nut and taped off individually.(not used) The black will go to the fan relay , the red wire will go to the fan limit switch or the printed circuit board if it is a newer furnace. Good luck, Mike
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frigidaire Furnace - Blower Motor Common Wire [ 2 Answers ]

I have a Frigidaire furnace model # FG6RA 096C-12B. I purchased a humidifier to install and do not have the users guide for the furnace. I need to know which wire is the blower motor common wire. Thanks for all your help.

How to wire air duct booster fan to units blower motor [ 2 Answers ]

I plan to install a booster fan in the air duct of my house. I want to wire it to the blower in the air box so it will only come on when the main blower is running. How do I wire it?

Blower motor [ 2 Answers ]

My blower motor won't stop running . Heat or A/C compresor won't turn on. Tapped on relay still don't shut off. It is a Carrier model#58GS100-2 please help hott in here. Thanks

Blower motor [ 2 Answers ]

How do you install blower motor in a gas furnace?

2 Wire White-Rogers with no wallplate wire question [ 2 Answers ]

Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...

View more questions Search