 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Monitor MPI 22 kerosene heater issues
My heater will sound like its starting up fine with the fan and all and the status/burner light on top will go up from bar to bar but then when it gets to the last bar it clicks off and the light starts flashing. My 7 year old son may have been messing with the on/off switch and pressed it a bunch of times? I tried pressing the reset switch on the lower right button side and nothing helps! When I look in the little viewing window in the front there is no flame whatsoever. I didn't know if there was some kind of pilot light that needs to be lit or if it is flooded or what? No idea? Please Help!! :)
|
||||
Check out some similar questions!
Does a older mpi 41 monitor heater need a pump to run.
[ 0 Answers ]
I know it has a pump to inject the oil into the chamber but what about getting oil to fill the bowl down bottom.. will gravity feed work.
Free help with monitor heater mpi 41wont fire
[ 0 Answers ]
Ny mpi 41 monitor heater will not fire.. it turns on and sounds like it will work but there is no spark or any flame nor is there any warning lights that's flash or come on.
I have a monitor kerosene heater 422 and I'm looking for a fuel strainer
[ 1 Answers ]
I have a monitor kerosene heater 422 and I'm looking for a fuel strainer. My heater is connected directly to my same fuel tank as my house furnace.
Kerosene heater
[ 1 Answers ]
When I turn off my kerosene heater,it doesn't go off immediately. Thr flame burns lower,but it takes at least an hour to go completely out. What do I need to do to ensure the flame goes off immediately when I turn it off.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
