Ask Experts Questions for FREE Help !
Ask
    cojekie's Avatar
    cojekie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2012, 09:19 AM
    Maple chase 9600 thermostat, low battery. Changed batteries, no display at all
    Display screen stays blank, even reset breakers and reset button on thermostat, still blank with new batteries installed
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 20, 2012, 12:37 PM
    Are batteries in right?, what kind of furnace? If gas do you see any led lights burning or blinking on the circuit/control board?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low Battery message on Maple/Chase Thermostat [ 8 Answers ]

I had a "low battery" message flashing on my Maple/Chase 0960T-1 programmable thermostat. When I replaced the batteries the low battery message remained on the display but this time, it was not flashing back and forth and none of the previous settings appeared on the display. None of the switches...

I had a low battery message on my maple/chase 0960t-1 thermostat [ 3 Answers ]

I had a low battery message on my maple/chase 0960t-1 thermostat. Batteries were replaced but getting no reading on the thermostat. What could be the problem?

Maple chase thermostat 9600 [ 0 Answers ]

After changing batteries in #9600 thermostat do I need to re-set? If so how? John Workman

Low battery, 9600 maple chase, [ 4 Answers ]

Our maple chase,9600 thermostat is showing lo battery. I have changed the batteries and checked charge. The fuse is good,(I think) It is still showing low battery. Thanks.

Maple Chase Thermostat low battery [ 1 Answers ]

Air Condition doesn't work because the Maple Chase Thermostat has a Low Battery

View more questions Search