Ask Experts Questions for FREE Help !
Ask
    dls's Avatar
    dls Posts: 0, Reputation: 1
    New Member
     
    #1

    Jul 7, 2007, 03:19 PM
    Maple Chase 9600
    I have two Maple Chase 9600 thermostats in a two zone system. Neither the air cond. furnace, or fan will come on. There is power to all units. Fuses are intact. The problem started a week ago (after 9 years of flawless use). I replaced the batteries and reset the thermostats. While reprogramming the thermostats, the air and furnace began to work again, but a week later the thermostats cannot activate anything again. Any suggestions for tests to isolate or fix the problem?

Check out some similar questions!

Maple/ chase thermostat [ 23 Answers ]

I let the batteries run low on my thermostat. I just replaced them but the display still reads "lo bat" and the heat does not kick on. I checked the fuse and it is still intact. Please help!!

Maple Chase Thermostat [ 16 Answers ]

We just purchased our home and have lived here all of 5 days. I woke up today freezing so I went to check the heat, It was set to go on if the thermostat read 68 or less. Well needless to say it did not go on. We are cold. The Maple Chase company is closed. The website does not even show our...

Maple Chase thermostat [ 6 Answers ]

I am hoping someone can answer my question. I have a digital maple chase thermostat and have it set to auto cool at 74 degrees. I noticed when it does not get over 74 and the air does not kick on for a few hours (more like 5 hours) that it resets itself to 78. Does anyone know why it does this?

Maple Chase Thermostat [ 3 Answers ]

Recently my heater turns on irreguarly - one day it will work, another day it may quit. The Heater is Bryant Model 580A packaged gas/electric unit. I have a Maple Chase thermostat in the house. It is about 16 years old. I have someone replaced a new ignition module about two months ago. What may be...

Maple Chase Thermastat [ 4 Answers ]

:confused: My thermastat was flashing LOBAT (low battery?) so I put in two new fresh batteries and it is still flashing LOBAT. Should I have turned it OFF first? How do I fix it?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.