I have an older analog Lennox thermostat and am replacing with a Lux ATX500 thermostat. The Lennox thermostat connections do not match those on the Lux. The Lennox is a 6 wire connection with terminals: F, V, R, X, Y, M The Lux has terminals: G, Y, W, RH, RC The Lux instructions are very...

can I replace a 80s Day & Night BDP 34427DP119 to a Lux TX 9100E BDP has 8 wires O= ORANGE, R=RED, C=BLACK, G=GREEN, Y=YELLOW, W1=WHITE, E=BROWN, W2=BLUE, F & T are not used. The Lux has A, RH, W2, RC, G, Y, W1, O, B, C, thanks

I have an American Standard Heat Pump with electric heat strips, I want to change the digital thermostat to a Lux programmable TX 9000ts. The american standard thermostat wiring is as follows R- red wire W2- jumper with a brown wire W1-jumper with a white wire Y- yellow wire G- green wire O-...

Please help. I have an old thermostat and know nothing about it but wanted to put the new Lux TX9000TS in for programming my heating and cooling. MY old bryant lr11746 thermo is hooked up with G1, R, O, C, E, W2, and a Y. Is there anybody that could help me figure this out as to what needs to go...

I recently changed from a manual-digital thermostat to a Lux TX9000TS electronic thermostat. All functions (Air, Heat & Fan) worked with the old thermostat. With the TX9000TS the air works fine and the fan blows in fan only mode. In the heat mode the Gibson air handler in the basement clicks and...