 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lennox Pulse 21 Furnace won't re-start
I have a Lennox Pulse 21 furnace from the 90's.Recently, the public service replaced a light pole and had to turn power off to my house. Now the furnace will not start and the blower motor is always on. I have gone through the steps to initiate restarting, but to no avail. Is is a simple fix or do I need to replace the whole unit?
|
||||
Check out some similar questions!
I have a lennox pulse furnace model no. gsr14q3-80 and when I turn the air conditioner on, the furnace hums and the outside air condition unit fan runs but the blower on the furnace will not run.
I am having a diagnostic "nightmare"... only due to lack of knowledge of the Lennox Pulse. This is a roughly '90 model. 80,000 BTU... The problem: Furnace lights for about 10 sec- 2 minutes... shuts down... It resembles a primary air problem, sounds of the fire sucking air. A previous tech just...
The furnace will run for about 30 sec, then shut down but the blower will stay running forever. It will try and light every minute after it shuts down. When it shuts down there is a red light that turns on for about 30 to 45 sec. Does this light tell me where to start looking for a repair?
My Lennox Pulse 21 furnace will not turn on. I can hear the thermostat click on but the furnace it self does not turn on. I replaced the filter and fuse. I also reset the furnace by the switch on the blower housing. The fan will come on if I turn it on at the thermostat but only cold air comes out.
Could you Please guide me to a source to obtain the Schematic Diagram of Lennox G14 or G21 Pulse Gas Furnace? I could not find the company web site!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
