Ask Experts Questions for FREE Help !
Ask
    joeweid's Avatar
    joeweid Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 28, 2008, 09:09 PM
    Lennox furnace no blower
    Have lennox G20 Q4 furnace. Burners work when called for but no blower. Blower will not run when selected at thermostat. Had a new circuit board for the G20 Q3 furnace, installed it. Result was blower ran prior to burners igniting and blower would not go off after burner shut down. Changed thermostat batts.
    I open for ideas.

    Joe
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 29, 2008, 12:17 AM
    Test all your fan and limit controls for proper operation. Recheck all of your connections on the new board.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox furnace blower doesn't come on when on "auto" [ 5 Answers ]

I have a Lennox furnace model G23Q3/4-100-2. When the thermostat calls for heat, the igniter will light the pilot, the gas will come on and light, but the blower does not come on and the furnace will shut off after a few minutes (overheats because of no blower). I can turn the thermostat to on...

Lennox electric furnace, blower off alignment, rubbing housing [ 1 Answers ]

Excuse my lack of mechanical knowledge and I hope I can explain the problem in an understandable way. The blower on the electric furnace has gotten out of alignment(?) and is rubbing the housing(?). I can put it in the correct position so it does not rub by physically holding the shaft but cannot...

Blower Motor (I think) Hum - Lennox Pulse 21 Heating Unit [ 1 Answers ]

Hi - I'm in a new home and turned on the furnace for the first time - a Lennox Pulse 21, fairly new by the looks of it. It was inspected a few weeks ago by the home inspector and passed, but I didn't notice anything at that time. When the unit starts up, and begins blowing heat, there is a...

Lennox furnace, blower not working [ 1 Answers ]

I have a 1000sqft town home with a Lennox furnace about 18 years old. My furnace blower is not working. I currently uneployed and job seeking and would like to avoid the cost of replacing the entire furnace. What sort of cost should I expect to replace the blower?


View more questions Search