Ask Experts Questions for FREE Help !
Ask

Intertherm furnace

Asked Oct 3, 2007, 09:14 AM — 2 Answers
I have just in the last month had an Intertherm furnace installed, and since installation they have had to come in twice because they claim the starter button is not firing. They replaced it and now it is on the fritz again. It starts for about 8 seconds and cuts out. There is fuel in the tank. They are coming back this am to fix it again. I f you have any suggestions as to why the experts can't fix my $3,000 furnace please let me know. Thank you Kim

Search this Thread
Share |
2 Answers
ballengerb1's Avatar
ballengerb1 Posts: 25,644, Reputation: 11296
Home Repair & Remodeling Expert
  
#2

Oct 3, 2007, 09:25 AM
Most installers are not the greatest repair people. Hope they are not sending the installers back each time. Tell them you want their best repair supervisor to take a look at it. There can be bad parts from the factory but its very rare, more likely damage during installation or just a poor install.
Helpful
hvac1000's Avatar
hvac1000 Posts: 14,539, Reputation: 2381
Heating & Air Conditioning Expert
  
#3

Oct 3, 2007, 03:12 PM


If it is a oil furnace have them check the oil line for leaks/suction leak. With oil it could be many things.
Helpful
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Intertherm furnace [ 1 Answers ]

I own a 1985 modular home and the intertherm blower fan on my furnace quit working is it too hard to fix or change?:confused: Also what is the cost to fix it?:eek: Please help!:) Thank you Rachell

Intertherm Furnace [ 1 Answers ]

My pilot light comes on and ignites heat exchanger but when the cover closes the flames shut down. The blower works but heat exchanger will not stay lit. I have replaced the gas valve and the thermo couple. Suggested that damper valve needed to be adjusted - where is the damper valve

View more Heating & Air Conditioning questions Search