 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm central electric furnace sequencer
I have a interthem central electric furnace and the auto blower setting does not work when on heat. The blower does work when set to on at thermostat or on blower unit. I have read it could be the sequencer. Does my unit have a sequencer and where is it located on the unit? Intertherm FEHA-020A-01
|
||||
Check out some similar questions!
My electric furnace sometimes wants to keep heating without ever shutting off. Changed the thermostat but, it still happens. I can tap briskly on the sequencer and it will shut off, and it will run as it is supposed to. But, then it can happen again. Is this probably a problem with the sequencer?
My Interthrem electric furnace will not run in automatic;I've changed the sequencer per suggestions,but to no avail what can I do?
After making sure my t stat was not the problem I replaced my sequencer... the problem was that my furnace would not quit making heat... worked for a few weeks and then the same thing happened but now I think one of the thermal fuses blew... what makes the sequencer go bad?
I have an Intertherm Central electric furnace model FEH-017H-C It has run perfect for years but lately the fan will not always start up. The thermostat clicks on the heater coils and after about 12 seconds the fan kicks in and circulates the warm air. Occasionally the thermostat clicks...
How do you replace the sequencer on an Intertherm Furnace by Central Electric? The model # is FEH-012HA-03 Appliance # E0000088245, 240v 60hz 1ph, 51.3 amps.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
