Add your answer here.
Check out some similar questions!
Temp set at 72 but temp won't go above 66 [ 2 Answers ]
We have a Lennox Pulse 21 furnace. Temp is set at 72 but the furnace stops once the temp reaches 66 degrees. Thermostat seems to be working. The seems to be a problem just when it is really cold (0 to 10 degrees).
Differential of return temp and cooled exit air temp [ 1 Answers ]
Here is the problem I am having, I had a new unit installed last year on my new house. I noticed that the compressor runs for a long time and shut off for a short period. This got my attention and wondered if the unit is running efficiently. I had my doubts from the start since the A coil looked...
Temp gauge showing temp, 2001 Chev Malibu [ 13 Answers ]
I have a 2001 Chev Malibu LS, V6, temp gauge is not showing any heat at all, not registering when I know the coolant is hot ? Veh has about 126000 my on it, never been flushed out, thought I would attempt to flush myself but don't you think the problem might be a bad thermostat ? If so, where and...
Question about supply temp. & return temp. [ 3 Answers ]
The AC system produced supply temps. At 57-60 degrees on the first floor With a return temp. Of 71 degrees. The second floor supply temp. Is at 59 degrees with a return temp. Of 72 degrees. I know there should be at least a 15 degree temp. Difference from the supply to return. There was also...
View more Heating & Air Conditioning questions Search