 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
how do i connect a hunter 44860 thermostat coming from a white-rodgers 1f58-72
I am trying to replace my white-rodgers 1f58-72 thermostat with a hunter 44860 programmable thermostat. My system is a Rheem RPLA-025jaz I have a couple of questions:
Where do I connect the brown wire that was connected to X1 on the white rodgers? (Does anyone know what X1 coincides with?) My system does not have an E wire so do I put the jumper from E to w2 and the w2 wire in the same terminal? Here is the terminal sequence for the hunter: Here's the wires I have for the White rodgers: Y1 L Y1 W2 O W2 G E G RH W1 RH?/RC/R? (ONLY HAS A RED WIRE LABELED R) RC/R B L X1 B I have already labeled my wires and can hook those to the new thermostat, but can someone please confirm that I am correct in matching up the letters and from the old and new thermostats. And can someone please tell me what the X1 wire is? Thanks, Nikki Clayton |
||||
Check out some similar questions!
There are some different wiring codes that are different how do I do it.
Have both manfacturers schematics for individual thermostats but in trying to install the new Hunter I have 7 different color coded wires projecting from wall with no association to the terminals on the rear of the new plate. Tried continuity checks but there doesn't seem to be any use for at...
I just typed this and lost it through some Firefox glitch so typing it all over again. I just disconnected my old White Rodgers Type 1F58-72 Thermostat which had the following connections. Red - R White - W2 - Auxiliary Heat Relay Blue - B - Reversing vale energizes during heat Yellow - Y...
I currently have a very old White Rodgers thermostat with large push buttons at the very top. I want to replace it with a Hunter Model 44260. Here is the current configuration -------------------------------------- red <= Don't know if RED goes to RC or RH white green yellow
Hello, I have a new home, built in 2003, with Central Heat and Air. It's all run off electricity and is using a Lennox Model CB29M-41-1P heat pump. The WHITE ROGERS DIGITAL HEAT PUMP THERMOSTAT 1F89-211 used the following wires: White Red Brown Orange Yellow
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
