 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to change the burner motor on beckett afg burner?
Hello:
RE: how to change the moter on my beckett afg After basement floods last summer , burner developed a canery which is getting louder each month. My inspection, I see two power wires, two bolts attached to the housing, and a set screw that refuses to break free. Is this set screw a right hand thread? I am using vice-grips attached to an 1/8 allen wrench and it not break free? Please out line the steps to replace motor. Thank you Marty |
||||
Check out some similar questions!
When my mother ran out of fuel oil, the company suggested that she put a few gallons of diesel in the tank to tide her over until Monday when she can get a regular delivery, rather than pay the emergency service fee a weekend delivery would require. I put a couple gallons diesel in the tank, saving...
Before I call a repair man would anyone here have an answer to why my oil burner will not kick on? Because of the cost of oil and the summer months offering some relief from the expense I decided to switch off the emergency switch so my expense on heating the hot water would be limited. For 2 days...
I have a WeilMclain boiler with a becket burner. It seems to run fine when warming the house to tempurature will cycle on and off with no proble. Lately I come home and the boiler is out. I push the reset and it fires right up. It started doing this every 4 days now it is every day. Recently...
I have a Beckett AFG burner, the furnace is power vented and has a V1 head. The burner starts up then after about 10 sec trips safety. I have replaced electrodes and nozzle, thoroughly cleaned head and air tube. Yesterday I had a service man come and adjust air using CO2 sensor and a probe to...
The Beckett AFG caused some trouble this year when my grandchildren accidentally turned off the EMERGENCY OIL Burner switch at the top of the stair case.. For some reason it caused water to spray out flooding the floor. I'd like to know how this could be prevented? I was told by the repair man the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
