Ask Experts Questions for FREE Help !
Ask
    paullager's Avatar
    paullager Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2006, 05:59 PM
    Hotwater heat (Boiler)
    I have two zones heating my house,all rooms except one does not receive heat. All rooms on that one zone did not receive heat until I removed the air out of that zone my removing many buckets of water,one room at a time started to receive heat. I believe I removed all the air out of the line but no heat on the one room that is on the end of that zone. Thanks===Paul
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Dec 5, 2006, 08:48 PM
    I have a feeling there is still airin that line. Maybe it will work itself out if you have a functioning auto vent.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hotwater heater [ 3 Answers ]

Hot water heater want ignite. What could be the problem? Pilot light is on but no ignition.

Hotwater heater HELP! Fast please [ 2 Answers ]

We have well water, today we lost all the pressure and we got no water. We would just turn the handle on in the kitchen or bathroom and nothing would happen. Well he wife had her dad come over to fix it, I don't know what he did but after he left we had water. Now, later on in the night I get ready...

Hotwater heater [ 2 Answers ]

Water comes out of my over flow copper tube. What do I need to do to fix it?

Hotwater heater wiring problem [ 2 Answers ]

Hi... My dad just replaced their 1970's hot-water heater with a brand new one. He used the same wire as the old water heater, he added a 30 amp double pull breaker at the breaker box, however it throws the breaker, unless he un-hooks the ground wire? There are 3 colors of wire on the "original" ...

Low hotwater pressure [ 18 Answers ]

Hi, the upstairs shower is only trickling when turn to hot. It's a one knob with hot/cold. The two sinks in the same bathroom are working just fine with hot. One thing, this shower is hardly ever use by the family. What could be the problem? Thanks

View more questions Search