Ask Experts Questions for FREE Help !
Ask
    Jlawrence01's Avatar
    Jlawrence01 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 18, 2006, 02:33 PM
    Honeywell Thermostat's
    I have a Honeywell T841 A 1712 series model thermostat with a seven wire configuration. I've purchased a digital programmable Honeywell RTH230 B 1006 five wire configured thermostat. I’m running into some problems trying to identify how to wire the seven wire setup to a five wire thermostat.

    My current T841 A 1712 model is configured with the adjustable heat anticipator. The wires are connected to (X,W2,R,G,Y,O, and E). This is similar to the T841 A 1720 wiring diagram setup for the T841 A “series” thermostat’s installation instructions that I’ve downloaded from the internet. Except for the (O) which does not appear in the T841 A 1720 wiring diagram. There are no examples that show my specific seven wire configuration.

    It is easy to see how to wire the fan (G), cooling (Y) and heat (W) relays from the wiring diagram provided with the new RTH230B “series” thermostat. I think I’ve got the (Rh) heating pwr & (Rc) cooling pwr figured out. Which quires me to what I should do with the other two wires for the AUX heat & EM heat?

    Is it possible to add additional black terminal connectors to support the extra two wires not identified in the Installation and Users guide that came with the new RTH230B “series” thermostat? Or, do I just tape them off and for get them?

Check out some similar questions!

Honeywell thermostat [ 11 Answers ]

I installed a Honeywell CT87A 4447 thermostat this summer. It worked fine with my air conditioning, but I am having a problem with it controlling my furnace. It will turn the furnace on and I can turn the fan on manually, but when set to auto the fan does not come on. The thermostat has the...

Honeywell RTH6300B [ 2 Answers ]

I'm kind of confused about the wiring, I have an old thermostat that I'm trying to replace but the wiring on it is different from what they have on the manual. The wires that are connected to the terminals are R, O, G, & Y which at the same time wrapped around the W terminal. How do I match the...

Help with new Honeywell RTH7500D [ 1 Answers ]

Hello Everyone. I just bought my new thermostat and installed it. Using my old thermostat, an old mercury White-Rodgers, I wiring the Honeywell to what I thought was a "conventional" system. I have gas heat and electric A/C. Outside I have the fan unit which blows air into the compressor and...

RTH7500D honeywell help please [ 2 Answers ]

I bought a Honeywell RTH7500D and am trying to install it, but (as appears to happen frequently) the wiring guide in the install manual does not match the wire labels from the old, non-programmable Stat. What I have in the OLD one: V RH RC G Y

Honeywell RTH230B [ 6 Answers ]

I am installing a Honeywell RTH230B thermostat but am not sure of the wiring. I have 6 wires colored as follows, red, green, white, yellow, and 2 blue wires. Please advise?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.