 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell LR1620
I'm replacing my Honeywell LR 1620 with a programmable thermostat. The honewell has a brown wire connected to the X terminal.
There is no x terminal on the Trane T8220. Which terminal should I connect the brown wire to on the new thermostat? Anthony |
||||
Check out some similar questions!
I have an Amana thermostat. There is no model number on the outside cover. However, when I take off the cover here is what is stamped on it: Class 2 30V Max LR1620 I took it off with intentions of putting it back after finished remodeling, but it somehow made it into the trash can with...
PLease provide wiring diagram for Honeywell LR1620 thermostat with heat pump/ac
I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...
I have replaced my old Honeywell / Carrier lr1620 Thermostat with a newer Hunter 44155c unit and have a wire on the back of the old unit that connects the "Y" terminal to a terminal marked "1". Does this refer to "Y1"? Should I connect this to the "Y1" terminal on my new Thermostat? The Wires...
Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
