Ask Experts Questions for FREE Help !
Ask
    ltempleton's Avatar
    ltempleton Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 29, 2009, 12:56 PM
    My honeywell furnace starts up and then stops
    Model T8112C1007
    I can not delete the hold temp of 57 on the thermostat, don't know if this has something to do with it. I can not find my manual
    The thermostat is digital, older model, with flush arrow keys...
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 29, 2009, 01:12 PM

    Manual is here: http://www.honeywell-thermostat.com/...112dmanual.pdf

    Depress the Run Program key to cancel indefinate hold
    ltempleton's Avatar
    ltempleton Posts: 2, Reputation: 1
    New Member
     
    #3

    Nov 29, 2009, 01:32 PM

    Thank you I will read the manual... I tried pushing the Run Program also.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My goodman furnace starts and then stops and then refires after a few seconds why [ 4 Answers ]

My goodman furnace starts like normal but after a few seconds stops and then restarts a few seconds later it fires then stops then refires why

Nordyne furnace starts & stops [ 12 Answers ]

I have a 8/9 yr old Nordyne gas furnace. I am remodeling this home and at night I shut the heat off to save energy. When start in the morn. I turn it on and set the theromstat at 65 deg. And it will start up and run but before it reaches what ever temperature I set it at, it will shut the burner...

Main blower sometimes starts and stops in Gas Furnace [ 3 Answers ]

Hi, I got a problem with main blower in gas furnace. I've checked this site, but didn't find an answer. Symptoms: Sometimes it starts and stops when burns work or don't start at all. Relay clicks to start blower in 30 seconds after burner started, but blower doesn't start or stops and then...

Only in AM, gas furnace stops and starts [ 1 Answers ]

Hello I have a Gaffers-Sattler furnace, about 40 years old. Runs great, but for one problem. In the morning around 5 or 6, I turn on furnace and it will heat up and run for about 5 to 6 minutes then stop for about 3 minutes and repeat this all morning long. (frustration as this is when its...

Furnace-Yellow terminal not connected-A/C starts stops [ 3 Answers ]

I have a 1988 Rheem RGDA-125-ER furnace. I noticed over the summer that the A/C, when switched to cool, would come on and then immediately switch off if the set temp was higher than the room temp. If I programmed the set temp far below room temp and then switched on, it would run normally and I...


View more questions Search