Ask Experts Questions for FREE Help !
Ask
    RuthiesRetreat3's Avatar
    RuthiesRetreat3 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 22, 2010, 02:32 PM
    Honeywell chronotherm I've plus manual
    Can't find in manual. How do I get the cover off the thermostat in order to change the battery? It's a Honeywell Chronotherm IV Plus.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    May 22, 2010, 02:52 PM
    GoGeisel.com - Honeywell Thermostat Owners Manuals
    LoanGuy's Avatar
    LoanGuy Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jun 7, 2010, 08:46 PM
    Pull GENTLY on bottom from both sides. It will pop off bottom - then the top is "hanging" on two plastic tabs sticking out of back unit. Swing up and forward and it will come off in your hands. Be careful with it putting it back on. There are about twenty five pins that have to line up on two sides to hit the corresponding holes in the faceplate to make the contacts. It might seem like you're pulling too hard, but just remember to pull ONLY from the bottom on BOTH sides and it will pop off.
    DCOSTANTINI's Avatar
    DCOSTANTINI Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Jan 12, 2013, 07:29 AM
    I've tried to program my honeywell chronotherm I've plus, but it seems to have a mind of it's own. The temperature seems to change all the time. I can't get the temperature to go down at night unless it is down manually. The only instruction I have is what is on the cover.
    chong lim's Avatar
    chong lim Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Mar 21, 2013, 01:17 PM
    My Honeywell chronotherm I've plus shows blinking "filter" on small screen and no heat is coming.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #6

    Mar 21, 2013, 01:31 PM
    Quote Originally Posted by chong lim View Post
    My Honeywell chronotherm iv plus shows blinking "filter" on small screen and no heat is coming.
    Change the filter in the air handler.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell Chronotherm IV Plus [ 7 Answers ]

My readout screen is blank on my Honeywell Chronotherm IV plus. I have a 5 zone system, and the other 4 work fine. Pushing buttons does not help.

Honeywell chronotherm I've plus manual [ 1 Answers ]

The thermostat is reading 86 degrees in the house. When set on auto & 78 degrees it does not kick in. what can I do to get the AC running?

Honeywell chronotherm I've plus user manual [ 1 Answers ]

How do I get the FAN off the AUTO mode?

Honeywell Chronotherm IV plus? [ 1 Answers ]

How do I reset the filter reset button for Honeywell Chronotherm IV plus?

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search