Ask Experts Questions for FREE Help !
Ask

Heil Furnace Troubleshooting

Asked Jul 28, 2012, 12:18 PM — 1 Answer
I have a Heil FBF100F14G1. The pressure tube for the inducer motor gets condensate in it and quits heating. After draining the water it heats again until next time. What causes this problem?? Improper venting??
thanks, Keith

Search this Thread
Share |
1 Answer
TopTechnician's Avatar
TopTechnician Posts: 9, Reputation: 1
New Member
  
#2

Jul 28, 2012, 07:53 PM
It could be that you don't have a trap on the furnace drain. Most condensing furnaces have special traps that come with the furnace. The trap prevents the suction of the inducer from pulling water back up the drain pipe. Your trap could be cracked or missing.
Helpful
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Heil furnace troubleshooting [ 11 Answers ]

My heil furnace does not come on, it comes on as soon as you move the thermastat but once it reaches temperature it won't come on again until you move the thermastat. It seams that the blower goes on instantly and blows cold air and eventually gets warm but never really that warm. Thanks for your...

Heil Furnace Troubleshooting [ 1 Answers ]

Heil furnace no ac the transformer has been replaced twice keeps burning out

heil n8mpn furnace troubleshooting? [ 10 Answers ]

Heil N8MPN. Fires up properly. Shuts down circulating fan and burners after 15 seconds to several minutes. Draft inducer continues to run for short period, kicks out then immediately kicks back on and then unit goes back through same sequence. Honeywell valve shows proper function with heartbeat...

Heil Furnace Troubleshooting? [ 0 Answers ]

my heil furnace won't start up, no gas coming out of control valve so igniter doesn't work, replaced valve and still nothing, exhaust fan works however

Heil furnace troubleshooting [ 1 Answers ]

Have a heil 100,00 btu furnace that is when it gets cold at night the burners will not stay burning, the electric pilot light is on but no ignition of the burners unless I shut the system down for a while. The blower stays blowing with no ignition of the ports

View more Heating & Air Conditioning questions Search