I have installed a coal stove next to my oil furnace. I have duct it to the furnace so I can use the fan. I have the fan running all the time but I want to be able to have the thermostat turn it on and off as it requires more heat. The thermostat is programmable With a fan only setting. But there...

My house is 1800 sq ft and made of the old bricks all the way around the foundation and walls of the house. The problem I have ran into is heating the house. I have 2 pellet inserts but it seem that no heat goes into the back bedrooms. I do not want to turn on the electric heat any ideas would be...

I have a hot water baseboard heating system 2 zones valves one zone is what the call a split zone it leaves the boiler in the basement I think 1 ins copper pipe goes to the end loops back to the boiler like in a u shape if you know what I mean the return is 3/4 copper the water seems hot going...

Hi there: I have American Standard HEATING AND AIR , After set the temp, the heater is start running hot air, about 4-5 min is worm air, then become cold air and never stop, till manualy shot it off , keep blowing cold air , some one told me go and change the termostat controler but did not...

Janitrol/Goodman Heater - Filter got wet and was replaced. The heater is cycling on and off, all the way up until the blower should go on and then it cycles down and after a couple of minutes it begins to recycle. I'm thinking it has something to do with the computer thinking there is a...