Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Luxaire furance should I see the flames when the desired temp is reached
[ 1 Answers ]
Wondering if flames on furance should always be visible when desired temp of furance is reached?
Goodman heat pump does not click off when thermostat reaches desired temp
[ 1 Answers ]
I have a goodman heat pump model #a32-10 controlled by a Honeywell Thermostat model #RTH3100C-installed last winter. Temperature in South Carolina this week has been ranging in the day in the lower to mid-40's and at night ranging in 20's or teens. I usually keep thermostat set between 66-68. The...
A/C won't shut off once desired temp is reached
[ 5 Answers ]
I recently changed out my old mercury thermostat to a Honeywell RTH3100C digital non-programmable thermostat. The issue I'm having is that once the desired temperature is reached on the thermostat the a/c won't shut off. What could be the issue?:(
My heat won't stop when desired temperature reached
[ 1 Answers ]
Hi, I have 5 electronic zones, each with a separate thermostat, running off a single circulator motor. Two of my zones were heating up way beyond the temperature set on the thermostats. I shut off the thermostats but the zones kept getting heat until I finally turned off the boiler. I've...
Cycling on-off before desired temp is reached
[ 2 Answers ]
GMP100-3 gas furnace: The furnace runs for 3-5 minutes then shuts itself off for 2-3 minutes then repeats the start- stop cycle. I turned the thermostat up but it still acts the same. Any tips would be appreciate View more questions Search
|