 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat pump suction line stays very cool in heat mode
My two rheem compressors sit side by side outside. Both SEEM to work normally in heat mode. HOWEVER, the smaller 1.5 unit gets no frost buildup at all and the lines stay lukewarm both outside and at the airhandler in my attic. Aux heat comes on for both units when temps dip below 35 dgrees as I would expect. Is it possible for the one compressor to be doing its job without ever getting the lines hot? A tech checked system pressures and freon recently and found all normal...
|
||||
Check out some similar questions!
My two rheem split sytems are side by side outdoors. The 1.5 ton unit for my upstairs area seems to work OK, but the freon lines never get close to hot at the compressor or in the attic at the air handler. The other unit is 2.5 tons for the other two floors of my house. The suction line for this...
I am selling my house and the home inspector noticed that when you turn the heat on, the heat pump doesn't come on and goes to auxiliary heat. It works fine for air conditioning and when I call for heat at the stat and push the contactor in manually it is blowing cold air out of the condensing...
Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump
I have a new Carrier Infinity 25HNA636A310 compressor. Does it run in both speeds when in heat mode
I have a 2 yr old heat pump.in heat mode at 40 deg outside I have 120 psi on the suction and 160 psi on the disc. 99 deg. At discharge from condenser.first season for heat.sounds like a stuck or leaking reverse valve. Any suggestions. Thanks ps I tried switching from air to heat a few times
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
