Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Changing from gas heat to electric heat
[ 3 Answers ]
How do you change from Apollo gas heating system to electric heating system?
Electric Heat/ cold air
[ 1 Answers ]
I use electric heat to heat my 1200 sq. home. Usually the therm. Is around 65 - 70, at night it is around 69, while sleeping under sheet & comfroter, we usually wake up hot, and Sweating (bed soaked from sweat), but when we remove the sheet. It is like the air in the room is too cold to do...
Cold Air is coming from my Carrier Gas Pack Unit and I need Heat
[ 0 Answers ]
I have a carrier gas pack unit and the cooling part works properly. It's starting to get cold, so I turned on the heat, but only cold air blows out of it. I've contacted my gas company and they said there is no pilot light, so there is no way it could've gone out, and theytold me I should contact...
Help it's cold outside and no heat
[ 3 Answers ]
I bought a new thermostat tonight, a honeywell CT87B, I unhooked the wires from the old stat, and now have no idea what there all for or where they go. I have a carrier central air unit, and an older sears hot water baseboard heat unit, I have two sets of wires coming from the wall. There first one... View more questions Search
|